Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial vehicle industry. 7/8 Male Flare Union Specs: Hex - 1.25" Length - 2.72" Type - SAE Flare Union Angle - 45 Degrees Thread Size - 7/8”-14 Tube Outer Diameter - 5/8" SAE J512 B
Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial vehicle industry.
7/8 Male Flare Union Specs:
Hex - 1.25
Length - 2.72
Type - SAE Flare Union
Angle - 45 Degrees
Thread Size - 7/8”-14
Tube Outer Diameter - 5/8
SAE J512
Benefits:
Durable
Chemically resistant
Broad range of operating temperatures
SAE 45 degree flare vs SAE 37 degree flare JIC:
45 Degree and 37 degree fittings SAE fittings do share the same thread form. i.e. 7/8-14. But are not compatible in terms of fitment, unless your fitting is a 45/37 which is specifically designed to seat either 45 or 37 degrees.
7/8 Male Flare Union Cross References:
AMC 04042-14 7/8 SAE Flare
Parker 42F-14 7/8 SAE Flare
MAF 42-14 7/8 SAE Flare
Champion Brass U2-14 7/8 SAE Flare
Tip: if you don't have a gauge to identify a fittings angle. Fold a sticky note or piece of paper from one corner to the opposite corner, now you have a 45 degree gauge. Stand your fitting on end. if the paper is flush on both the fitting and the surface its sitting on, then your fitting is 45 degrees.
SAE 45° Flare Fittings Green Line Hose & Fittings
Hydraulic Fitting Thread Chart
SAE 45° Flare Fitting, Union, Brass, 3/8, 5/8-16 Thread
SAE J512 J513 45° flare brass tube fittings, straight union and
Brass SAE 45° Fitting, Union Elbow, #155F (PARKER UNION ELL 5/8
SAE J512 J513 45° flare brass tube fittings, straight union and
Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial
7/8 Male Flare Union SAE 45 Degree Fitting, Brass - SAE J512
166FSV-12-12 - Brass 45° Flare Fittings
Brass SAE 45 Flare Fittings, & 37 Flare
45 Deg. Flared Tube Fittings-SAE J512
Hydraulic Fitting Thread Chart
Brass Fittings DOT APPROVED AIR BRAKE FITTINGS AND SAE J844 NYLON
Legines Brass Inverted Flare Fitting, Brake Line 45
Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial
7/8 Male Flare Union SAE 45 Degree Fitting, Brass - SAE J512